Blackburn Chamber Tubeless Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Blackburn Chamber Tubeless (2 sivua) kategoriassa Loisto. Tämä opas oli hyödyllinen 42 henkilölle ja sai 4.0 tähden keskimäärin 8 käyttäjältä

CHAMBER TUBELESS

™

Floor pump

Part# 7085522

31.8mm stem clamp

15.75" riser bars

Alloy pump mode lever

OPERATING IN PUMP/RELEASE MODE

Operate pump in “Pump/Release” mode with lever

locked in vertical position (FIGURE A). This will allow

air to bypass reservoir for more efficient

direct-to-tire pumping.

T6063 Alloy barrel

Hose pivot

Anyvalve™ pump head

160 PSI, top-mounted gauge

Air bleed button

Stamped metal base

Extra long 4ft hose

Note: Air bleed does not work on Dunlop valves.

2. PUMP

1. CHARGE

3. RELEASE

TO USE IN CHARGE MODE AND SEAT TIRE

1. Rotate lever up 90° to “CHARGE” mode with lever in

horizontal orientation. Insure it locks in place.

2. Operate pump and charge reservoir to 160psi. (Figure B)

3. Return lever back to “Pump/Release” mode to

instantly release tire bead seating pressure.

SHORT PRESTA/

DUNLOP

LONG PRESTA/

SCHRADER

Air bleed

>20mm LONG

PRESTA

<20mm SHORT

PRESTA

ANYVALVE PUMP HEAD WITH AIR BLEED BUTTON

WARNING: DO NOT CHARGE YOUR PUMP PAST 160PSI AS INDICATED ON THE GAUGE. NEVER OVERINFLATE YOUR TIRE. SEE SIDEWALL FOR MANUFACTURER

RECOMMENDED TIRE INFLATION PSI. KEEP FINGERS CLEAR OF TIRE WHEN SEATING BEAD.

B.

A.

Customer Service: 1-800-456-2355

Blackburndesign.com

Printed in Taiwan

Tuotetiedot