Best 639 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Best 639 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 25 henkilölle ja sai 4.8 tähden keskimäärin 13 käyttäjältä

Sivu 1/2
3¼” x 10” RECTANGULAR DUCT
WALL CAP INSTALLATION
INSTRUCTIONS
Plan installation carefully. Before installing wall cap, make
sure that birdscreen is in place and bowed outward. Make
sure that birdscreen does not interfere with movement of
damper flap. Refer to Figure 5 and Step 8 under “Mainte-
nance.
Wall cap accepts 3¼” x 10” duct. Tape all ductwork joints with
duct tape to prevent air and water leaks.
1. Cut opening 3½” x 10¼” in sheathing or wall board so that
wall cap will line up easily with duct.
2. Determine thickness of final wall and adjust wall cap and duct
to that cap will be flush with face brick. (Fig. 1)
3. After face brick is installed, nail or screw cap to wall using
holes in wall cap flange.
4. Caulk all around flange with high-quality caulking com-
pound. (Fig. 2)
5. Run ductwork from range hood or fan. Tape all joints with
duct tape.
INSTALLATION IN FRAME CONSTRUCTION
1. Cut opening 3½” x 10¼” in wall so that wall cap will line
up easily with ductwork. (Fig. 3)
2. Nail down siding corners. Trim opening in siding with cas-
ing strips. (Fig. 4).

Tuotetiedot

Merkki: Best
Kategoria: Ei luokiteltu
Malli: 639

Tarvitsetko apua?

Jos tarvitset apua merkille Best 639 esitä kysymys alla ja muut käyttäjät vastaavat sinulle