AXESS AXTO-TY1 Käyttöohje

AXESS Ei luokiteltu AXTO-TY1

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXTO-TY1 (8 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 46 henkilölle ja sai 4.8 tähden keskimäärin 23.5 käyttäjältä

Sivu 1/8
AXTO-TY1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 4/26/22 INSTAXTO-TY1
ATTENTION: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product. Ensure
that all installation connections, especially the
air bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip-ties
• Small flat-blade screwdriver
TABLE OF CONTENTS
Connections .........................................................2-3
Installation .............................................................3
Programming .........................................................3
Audio level adjustment .........................................3
Wiring diagram ......................................................4
Toyota Digital Amplifier Interface 2001-2015
Designed for amplified models
Retains balance and fade
USB Micro-B updatable
• AXTO-TY1 harness
• AXTO-TY1 interface
• 16-pin harness with stripped leads
APPLICATIONS
See inside front cover
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXTO-TY1

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXTO-TY1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle