AXESS AXSWCH-FD1 Käyttöohje

AXESS Ei luokiteltu AXSWCH-FD1

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXSWCH-FD1 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 27 henkilölle ja sai 4.6 tähden keskimäärin 14 käyttäjältä

Sivu 1/4
AXSWCH-FD1
I N S TA L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 12/29/21 INSTAXSWCH-FD1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
the aftermarket radio.
INTERFACE FEATURES
Prewired AXSWC harness
Retains the factory backup camera
INTERFACE COMPONENTS
• AXSWCH-FD1 harness
• AXSWC interface (sold separately)
TOOLS REQUIRED
• Wire cutter
• Crimp tool and connectors
(example: butt-connectors, bell caps, etc.)
or
• Solder gun, solder, and heat shrink
• Tape
• Zip-ties
TABLE OF CONTENTS
Connections ............................................................2
Plug and Play Harness for the AXSWC
Ford Fiesta 2011-2016
Ford Focus 2012-2016 (w/o SYNC)
Ford Transit 2012-2016 (w/CD & w/o NAV)
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle
specific applications

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXSWCH-FD1

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXSWCH-FD1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle