AXESS AXPIO-SIL2 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXPIO-SIL2 (12 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 45 henkilölle ja sai 4.9 tähden keskimäärin 9 käyttäjältä

AXPIO-SIL2

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 7/30/24 INSTAXPIO-SIL2

TABLE OF CONTENTS

Kit Features2 ............................................................

Speaker Installation...............................................2

Dash Disassembly3-4 ..............................................

Connections5 ............................................................

Radio Tuner Location6 .............................................

Kit Preparation7 .......................................................

Kit Assembly8 ..........................................................

Radio Operations9-10 ..............................................

Chevrolet Silverado 1500(excluding WT Trim) 2019

Chevrolet Silverado 1500/2500/3500

Visit for more AxxessInterfaces.com

detailed information

about the product and

up-to-date vehicle specific applications.

WIRING & ANTENNA CONNECTIONS (sold separately)

• RGB Extension Cable: Pioneer part # CD-RGB150A

(not sold by Metra)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 9/32" socket wrench • T-15 Torx screwdriver

ABC

(excluding WT Trim)

*

2019-2020

*Models with a 2 knob 8-inch screen radio, RPO code IOS or IOT.

The RPO code can be found in the Label located on the inside Vehicle Certification

of the driver’s door opening.

A mobile device with a QR scanner must be used to decipher the code.

KIT COMPONENTS

•A) Display screen housing • B) Display screen brackets • C) Blank-out panel

Not Shown: Radio Interface, LD-GM30-PIO, LD-GM31-PIO, AXEXH-GM30, AXEXH-GM31, AD-EU5, 40-GPS-PIO, PR04AVIC-PIO / PRO4-PIORCA, LD-AX-SPK

GMC Sierra 1500

*

2019

GMC Sierra 1500/2500/3500 2019-2020

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights, are

plugged in before reconnecting the battery or cycling

the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Tuotetiedot