AXESS AXDI-GLMLN29 Käyttöohje

AXESS Ei luokiteltu AXDI-GLMLN29

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXDI-GLMLN29 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 36 henkilölle ja sai 4.6 tähden keskimäärin 18.5 käyttäjältä

Sivu 1/4
Installation instructions for part AXDI-GLMLN29
REV. 1/20/2020 INSTAXDI-GLMLN29
axxessinterfaces.com metraonline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Axxess Integrate
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, and speed sense)
Retains chimes through an onboard speaker
Pre-wired AXSWC harness (AXSWC sold separately)
Designed for non-amplified models, analog amplified models,
or when bypassing a factory amp
Retains balance and fade
Micro-B USB updatable
INTERFACE FEATURES
Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (i.e. butt-connectors, bell caps, etc.)
TOOLS REQUIRED
AXDI-GLMLN29
GM Data Interface
2006-Up
Connections to be made 2-3 ................................................
Installing the AXDI-GLMLN29 3 ...........................................
Initializing the AXDI-GLMLN29 3 .........................................
TABLE OF CONTENTS
INTERFACE COMPONENTS
AXDI-GLMLN29 interface • AXDI-GLMLN29 harness
APPLICATIONS
See application list inside cover

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXDI-GLMLN29

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXDI-GLMLN29 esitä kysymys alla ja muut käyttäjät vastaavat sinulle