AXESS AXDI-CL2 Käyttöohje

AXESS Ei luokiteltu AXDI-CL2

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXDI-CL2 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.2 tähden keskimäärin 19 käyttäjältä

Sivu 1/4
AXDI-CL2
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/21/20 INSTAXDI-CL2
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
Connections .........................................................2-3
Installation .............................................................3
Programming .........................................................3
GM Data Interface 2000-2013
APPLICATIONS
See inside front cover
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides illumination, parking brake, reverse, and speed sense outputs
Retains chimes through an onboard speaker
Pre-wired AXSWC harness (AXSWC sold separately)
Designed for non-amplified models, analog amplified models,
or when bypassing a factory amplifier
Retains balance and fade
Micro-B USB updatable
• AXDI-CL2 interface
• AXDI-CL2 harness

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXDI-CL2

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXDI-CL2 esitä kysymys alla ja muut käyttäjät vastaavat sinulle