AXESS AXBUCS-NI326V Käyttöohje

AXESS Ei luokiteltu AXBUCS-NI326V

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXBUCS-NI326V (5 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.4 tähden keskimäärin 19 käyttäjältä

Sivu 1/5
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
REV. 1/20/20
axxessinterfaces.com metraonline.com
Axxess Integrate
Installation Instructions for AXBUCS-NI326V
INTERFACE FEATURES
• Pre-wired AXSWC harness (AXSWC sold separately)
• Retains the factory backup camera to an aftermarket radio
• Includes the AXCSD-6V 12-volt to 6-volt converter
Nissan (with 4.3" display radio) 2010-up
INTERFACE COMPONENTS
• AXBUCS-NI326V harness • AXCSD-6V 12-volt to 6-volt converter
APPLICATIONS
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
TOOLS REQUIRED
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
NISSAN
Altima coupe 2010-2013*
Altima sedan 2010-2012*
Altima sedan 2013-up
Cube 2010*
Frontier 2013-up*
Juke 2015-up*
Murano 2015-up
Quest (without Bose)
2011-up*
Rogue 2011-2013*
Rogue 2014-up
Rogue Select 2014-2015*
Sentra 2010-up*
Titan 2013-2015*
Versa Note 2014-up*
* For use when retaining the OE backup camera only.

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXBUCS-NI326V

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXBUCS-NI326V esitä kysymys alla ja muut käyttäjät vastaavat sinulle