AXESS AXBUCS-NI246V Käyttöohje

AXESS Ei luokiteltu AXBUCS-NI246V

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXBUCS-NI246V (5 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 38 henkilölle ja sai 4.3 tähden keskimäärin 19.5 käyttäjältä

Sivu 1/5
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
REV. 5/19/20
axxessinterfaces.com metraonline.com
Axxess Integrate
Installation Instructions for AXBUCS-NI246V
INTERFACE FEATURES
• Pre-wired AXSWC harness (AXSWC sold separately)
• Retains the factory AUX-IN jack
• Retains the factory backup camera to an aftermarket radio*
* Will not work with models equipped with an "All Around Camera" system
AXBUCS-NI246V
Nissan (with NAV) 2011-Up
INTERFACE COMPONENTS
• AXBUCS-NI246V harness • AXCSD-6V 12-volt to 6-volt converter
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
TOOLS REQUIRED
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
NISSAN
Altima 2013-Up
Cube
2011-2014*
Frontier 2013-Up*
Juke 2011-2014*
NV 2012-Up*
NV200 2012-Up*
Rogue (w/ Bose)
2012-2013*
Rogue 2011*
Sentra 2011-Up*
Titan 2013-2015*
Versa 2013-Up*
Xterra
2013-2015*
APPLICATIONS
* For use when retaining the OE backup camera only

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXBUCS-NI246V

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXBUCS-NI246V esitä kysymys alla ja muut käyttäjät vastaavat sinulle