AXESS AXABH-TY1 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXABH-TY1 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 47 henkilölle ja sai 4.9 tähden keskimäärin 4 käyttäjältä

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AXABH-TY1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 11/25/20 INSTAXABH-TY1

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Amplifier Location .................................................2

Connections

- Toyota ...............................................................3-5

- Lexus ....................................................................6

Toyota / Lexus Amplifier Bypass Harness

2003-2010

• Amplifier bypass harness

• Vehicle-specific harness to bypass the factory amplifier

• Allows loose wires to wire to an aftermarket amplifier

• Saves the installer unnecessary labor and wire

Always verify speaker output by testing with a tone generator, or similar device before making

connections. The output locations follow the manufacturers’ terminology for the speakers.

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle specific applications

APPLICATIONS

Toyota

4Runner 2003-2009

Matrix 2003-2010

Prius 2004-2005

Sequoia 2005-2007

Sienna 2004-2010

Solara 2005-2008

Tacoma 2005-2008

Tundra 2005-2006

Lexus

RX330

(excluding Mark Levison audio)2004-2006

INTERFACE FEATURES

Tuotetiedot