AXESS AX-DSP-TY2 Käyttöohje

AXESS Ei luokiteltu AX-DSP-TY2

Lue alta 📖 käyttöohje suomeksi merkille AXESS AX-DSP-TY2 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 45 henkilölle ja sai 4.9 tähden keskimäärin 23 käyttäjältä

Sivu 1/4
AX-DSPHNS
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/2/18 INSTAX-DPSHNS
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
TABLE OF CONTENTS
20-Pin Harness Pinout...........................................2
Additional Wiring & Notes ....................................3
AX-DSP T-Harness
The Axxess T-harness is a basic and simple plug-n-play harness for easy installation of the AX-DSP (sold separately) for vehicle
specific applications. Most T-harnesses created by Axxess will either have a 4-pin or 8-pin harness, with the speaker wires pinned.
If you are installing a 4-channel amplifier with the AX-DSP, leave these connectors disconnected. The only reason for connecting
these harnesses together would be if the AX-DSP is being used for adding a subwoofer amplifier only. Some T-harnesses require
additional wiring and/or installation steps. Refer to the following page for a pinout legend for the 20-pin harness, and also
additional wiring and notes.

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AX-DSP-TY2

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AX-DSP-TY2 esitä kysymys alla ja muut käyttäjät vastaavat sinulle