AXESS AX-ADXSVI-FT1 Käyttöohje

AXESS Ei luokiteltu AX-ADXSVI-FT1

Lue alta 📖 käyttöohje suomeksi merkille AXESS AX-ADXSVI-FT1 (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 40 henkilölle ja sai 4.3 tähden keskimäärin 20.5 käyttäjältä

Sivu 1/3
INSTAX-ADXSVI-FT1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 12/17/13
AX-ADXSVI-FT1
Fiat 500 accessory and NAV output CAN interface 2012-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Usedinbothamplifiedandnon-amplifiedsystems
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
FIAT
500 2012-up
WIRING UP THE AX-ADXSVI-FT1
• ConnecttheYellowwiretotheradio’s12voltbatteryormemorywire.
• Connectthe wiretotheradio’sgroundwire.Black
• Connectthe wiretotheignitionwireoftheaftermarketradioRed
• Connectthe wiretotheilluminationwireoftheaftermarketradio.IftheOrange
aftermarketradiohasnoilluminationwire,tapeoffthe wire.Orange
• Connectthe wiretotheradio'sampturnonwire. Blue/White
• Connectthe wiretotheleftfrontpositivespeakeroutputoftheWhite
aftermarketradio.
• Connectthe wiretotheleftfrontnegativespeakeroutputoftheWhite/Black
aftermarketradio.

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AX-ADXSVI-FT1

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AX-ADXSVI-FT1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle