AXESS ASWC-1 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille AXESS ASWC-1 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 45 henkilölle ja sai 4.0 tähden keskimäärin 23 käyttäjältä

Sivu 1/4
ASWC-1 GENERAL INSTRUCTIONS
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/15/18 INSTASWC-1 General Instructions
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Installation Preparation ........................................2
Installation .............................................................2
Programming .........................................................3
Wire Description ....................................................3
ASWC-1 General Instructions
One interface does it all, no
additional interfaces needed
Designed to be compatible
with all major radio brands
Auto detects vehicle type, radio
connection, and preset controls
Ability to dual assign steering
wheel control buttons
Can be manually programmed
for most vehicles
Retains settings even after
battery disconnection or
interface removal
All connections done at the
radio location
Micro-B USB updatable
ASWC-1 Interface
ASWC-1 harness (12-pin harness with male 3.5mm jack)
Female 3.5mm connector with stripped leads
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: ASWC-1

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS ASWC-1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle