AXESS 99-5825B Käyttöohje

AXESS Ei luokiteltu 99-5825B

Lue alta 📖 käyttöohje suomeksi merkille AXESS 99-5825B (8 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 38 henkilölle ja sai 4.5 tähden keskimäärin 19.5 käyttäjältä

Sivu 1/8
INSTALLATION INSTRUCTIONS FOR PART 99-5825
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
REV. 12/19/2019 INST99-5825
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• ISO DIN radio provision
• Driver information circuits and buttons
• Painted Silver or Matte Black to match factory finish
A) Radio Housing • B) Radio ISO Brackets • C) (6) #8 x 3/8” Phillips truss head screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-5524-NAV Ford interface 2011-up
Antenna Adapter: • 40-EU10 multi-app adapter
• Panel removal toolPhillips screwdriver • Socket Wrench • Cutting Tool
TOOLS REQUIRED
A CB
Dash Disassembly
Ford Fiesta 2011-Up 2 ............................................
Kit Assembly
ISO DIN radio provision......................................... 3
NOTE: This kit comes pre-programmed for vehicles
equipped with SYNC. It will not operate properly in vehicles
equipped without SYNC unless it is programmed.
Programming for vehicles without SYNC:
1. Turn on the ignition.
2. Press and hold the kit’s menu button for
ten seconds.
3. Release the menu button and test the kit’s buttons
for proper operation.

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: 99-5825B

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS 99-5825B esitä kysymys alla ja muut käyttäjät vastaavat sinulle