Avantco SL612A Käyttöohje
Avantco
Leikkuukone
SL612A
Lue alta 📖 käyttöohje suomeksi merkille Avantco SL612A (15 sivua) kategoriassa Leikkuukone. Tämä opas oli hyödyllinen 21 henkilölle ja sai 4.5 tähden keskimäärin 11 käyttäjältä
Sivu 1/15
User Manual
www.AvantcoEquipment.com 1
Meat Slicer Instruction Manual
Models: 177SL612A, 177SL713A
Please read and keep these instructions. Indoor use only.
02/2022
User Manual
User Manual
2 www.AvantcoEquipment.com
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
These instructions must be followed for us to guarantee our full support of your claim for
protecting against loss from concealed damage. The form for filing such a claim will be
provided by the carrier.
General Installation And Operation
Instructions:
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. The unit can be operated in either MANUAL or AUTO feed modes.
5.1 MANUAL MODE
Ensure the control lever H in diagram 1 is position A. This handle disengages
auto feed function.
Switch on the blade motor only and using the handle on the food pusher, push
the carriage back and forth to
begin cutting the food.
5.1 AUTO FEED MODE
Ensure the control lever H in diagram 1 is in position B. This handle engages
the auto feed function.
Switch on the blade motor rst and then the auto feed motor. The unit will now
automatically cut the meat oaded.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
Diagram 1
A B
H
User Manual
www.AvantcoEquipment.com 3
Safety
1. The units are designed to operate an alternating current (A.C) only. DO NOT CONNECT TO DIRECT CURRENT (D.C).
2. Please ensure that the power supply cord does not come into contact with hot surfaces.
3. If the supply cord is damaged, it must be replaced with a new cord assembly. (Available from the suppliers agent.)
4. The appliance must only be used for its intended purpose.
5. It is strongly suggested that the operators of this machine wear close tting clothes. It is essential when blade
maintenance or cleaning is undertaken that suitable hand protection gloves are used.
6. ALWAYS unplug the slicer before undertaking cleaning or maintenance of the unit.
7. These machines must be operated by trained personnel and should never be used by unskilled operators or children.
8. The blade must be replaced when it has reduced in size by 5mm.
Checking the Gear Box Oil Gauge
Check the glass window [A] to ensure oil levels are properly
maintained. When oil levels drop below the indication line, more oil
will need to be added using the oil dispenser provided. The dispenser
nozzle must be inserted into the port [B].
There is also an additional port [B] on the side of the unit to lubricate
the side shafts. This ports needs to be lled when the stroke is moving.
Generally this port needs to be lled once a week with only two pushes of
the dispenser.
Note: A new machine needs to run for 20 minutes before the oil gauge
begins showing oil” – add to the section “Checking the Gear Box Oil
Gauge.
A B
LubriQuik food grade silicone spray lubricant is ideal for use on virtually any equip-
ment or machinery that makes contact with food, such as slicers, conveyor sys-
tems, bottling and canning machinery, bakery equipment, and dairy equipment.
Tuotetiedot
| Merkki: | Avantco |
| Kategoria: | Leikkuukone |
| Malli: | SL612A |
Tarvitsetko apua?
Jos tarvitset apua merkille Avantco SL612A esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Leikkuukone Avantco Käyttöohjeet
28 Joulukuuta 2024
Leikkuukone Käyttöohjeet
- Leikkuukone Prowork
- Leikkuukone Khind
- Leikkuukone RGV
- Leikkuukone Kogan
- Leikkuukone GOTIE
- Leikkuukone Globe
- Leikkuukone Weston
- Leikkuukone Eldom
- Leikkuukone Brandson
- Leikkuukone Gude
- Leikkuukone Backyard Pro
- Leikkuukone Boss
- Leikkuukone CaterChef
- Leikkuukone Genius
- Leikkuukone Livoo
Viimeisimmät Leikkuukone Käyttöohjeet
27 Maaliskuuta 2025
27 Maaliskuuta 2025
13 Helmikuuta 2025
9 Helmikuuta 2025
8 Helmikuuta 2025
31 Tammikuuta 2025
12 Tammikuuta 2025
4 Tammikuuta 2025
2 Tammikuuta 2025
30 Joulukuuta 2025