Atlona AT-VCC-IR-KIT Käyttöohje

Atlona Ei luokiteltu AT-VCC-IR-KIT

Lue alta 📖 käyttöohje suomeksi merkille Atlona AT-VCC-IR-KIT (12 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 27 henkilölle ja sai 4.0 tähden keskimäärin 14 käyttäjältä

Sivu 1/12
Installation Guide
AT-VCC-IR-KIT
1
IP to IR Command Converter for Velocity Control System
AT-VCC-IR-KIT
The Atlona AT-VCC-IR-KIT is an accessory for the Atlona Velocity Control System that provides
conversion from IP control commands to IR. This Velocity Control Converter is very compact
and can be placed anywhere a device requires IR control. The VCC-IR-KIT is remotely powered
onto any surface via a convenient mounting dock. A simple click locks it into place for a secure,
reliable installation. The IR adapter module includes three 3.5 mm ports for connecting the AT-
VCC-IR-EMT emitters. Each port is independently addressable, allowing discrete IR control of
three dierent AV devices.
1 x AT-VCC
1 x AT-VCC-IR
Package Contents
Operating Notes
The Velocity Command Converter must be on the same network as the Velocity Gateway
(AT-VGW-250) or it will be unable to sync for control.
The AT-VCC-IR-KIT is PoE, to power the unit, simply plug it into a PoE compatible network
switch. If the network switch is not PoE capable, a PoE injector or USB (purchased separately)
can be used.
All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the
DHCP IP address reserved for each individual device.
IMPORTANT: Velocity Gateway (AT-VGW-250) must be set up before the AT-VCC-IR-KIT
is fully functional.

Tuotetiedot

Merkki: Atlona
Kategoria: Ei luokiteltu
Malli: AT-VCC-IR-KIT

Tarvitsetko apua?

Jos tarvitset apua merkille Atlona AT-VCC-IR-KIT esitä kysymys alla ja muut käyttäjät vastaavat sinulle