API Audio 500VPR Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille API Audio 500VPR (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 24 henkilölle ja sai 5.0 tähden keskimäärin 12.5 käyttäjältä

Sivu 1/2
500
V
500-V Vertical Module Rack
Features
Holds 10 API Standard Format 5.25 x 1.5 Modules
XLR Jacks for Inputs and Outputs
Pre Wired Rack
Externally Powered
19 Rack Mount, 3U Tall
Perfect for Outboard EQ / Mic Pre Modules
The API Model 500V is powered externally by a tri-polar
power supply and is designed to accept many different
API standard format 5.25 x 1.5 modules. The 500V
comes internally wired for PIN 2 hot. Any external dual
16 volt power supply can be used, or the API 200PS
can be purchased. The input/output jacks are both XLRs.
The 500V can hold up to ten API modules, regardless of
the era.
The 500V comes internally unwired, allowing facility to wire the module inputs
and outputs, nominal levels, and special interface functions to the rear panel
XLR connectors. The rack is also available wired to any specifications.
The 500V can be ordered with an optional 48 volt phantom power supply, bussed
to pin 15 for the API 512C to access. It must be noted that the older API 560A
series equalizers used pin 15 for a direct output and must be disabled on the
560A circuit board edge connector by cutting a trace. This will eliminate 48
volts from damaging the 560A series equalizers.
API makes several modules to fit this rack, including the 550B, 560, 525, and
512C. These modules are designed to help expand existing limited input con-
sole configurations, allowing a facility an option to a larger console.
8301 Patuxent Range Rd Jessup 20794 301 776 7879 301 776 8117. , MD Phone ( ) - Fax ( ) - sales@apiaudio.com

Tuotetiedot

Merkki: API Audio
Kategoria: Ei luokiteltu
Malli: 500VPR

Tarvitsetko apua?

Jos tarvitset apua merkille API Audio 500VPR esitä kysymys alla ja muut käyttäjät vastaavat sinulle