Apc AP7532 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Apc AP7532 (1 sivua) kategoriassa Kytkin. Tämä opas oli hyödyllinen 9 henkilölle ja sai 5.0 tähden keskimäärin 5 käyttäjältä
Sivu 1/1

*990-2395*
990-2395 05/2005
Addendum — Rack PDU
Circuit Breaker Operation
How to reset a mid-tripped circuit breaker
The circuit breaker is at a mid-trip state when the
actuator is partially extended from the circuit
breaker, but not fully extended, as if it had been
turned off manually. Pushing the actuator in while
in mid-trip state will not reset the breaker. The
circuit breaker needs to be fully extended before it
can be reset. To fully extend the circuit breaker:
1. Insert a small slotted screwdriver or other tool
into the hole located above the word “OFF”.
2. Push the lower part of the actuator in gently
until the upper part “clicks” out.
How to reset a circuit breaker
The circuit breaker is ready to be reset when the
actuator is fully extended. Quickly and forcefully
push the circuit breaker actuator into the PDU to
reset the breaker.
pdu0346a
Note
Before resetting the circuit breaker you
should determine the cause of the fault
and remedy the fault before resetting
the circuit breaker. If the fault is not
removed, the breaker will trip again as
soon as it is reset.
pdu0345a
Tuotetiedot
Merkki: | Apc |
Kategoria: | Kytkin |
Malli: | AP7532 |
Tarvitsetko apua?
Jos tarvitset apua merkille Apc AP7532 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kytkin Apc Käyttöohjeet
10 Maaliskuuta 2025
Kytkin Käyttöohjeet
- Kytkin Tenda
- Kytkin Nedis
- Kytkin Blustream
- Kytkin Sonance
- Kytkin Finder
- Kytkin Airlive
- Kytkin Theben
- Kytkin IOGEAR
- Kytkin Elektrobock
- Kytkin Jung
- Kytkin Vemer
- Kytkin Schneider
- Kytkin INOGENI
- Kytkin Kaiser
- Kytkin ATen
Viimeisimmät Kytkin Käyttöohjeet
9 Huhtikuuta 2025
5 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
2 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025