Angler BB-RE-2436-V2 Käyttöohje
Angler
Ei luokiteltu
BB-RE-2436-V2
Lue alta 📖 käyttöohje suomeksi merkille Angler BB-RE-2436-V2 (8 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 18 henkilölle ja sai 5.0 tähden keskimäärin 9.5 käyttäjältä
Sivu 1/8

BoomBox for Bowens Mount
BB-26DB-V2/BB-36DB-V2/BB-48DB-V2
BB-ST-1024-V2/BB-ST-1236-V2/BB-ST-1255-V2
BB-RE-2436-V2
INSTRUCTIONS

2
Setting Up the BoomBox
1. For Monolights and studio strobes with Bowens mounts, align the mounting
tabs with the Bowens mount and insert the BoomBox into the Bowens mount.
Turn the BoomBox clockwise until it locks.
2.
Open the BoomBox, and push the center ring
over the shaft until it’s all the way in, just like
an umbrella.
Tip: You may find it easier to hold the base of the shaft
through the side opening while pushing the center
ring over it.
3.
Adjust the BoomBox’s orientation by loosening
the adapter ring's thumbscrew and rotating the
BoomBox. Tighten the thumbscrew until secure.
Optional: To add the deflector to the BoomBox,
screw the deflector extension into the center stem.
Once it’s attached, slide the deflector plate onto the
extension.
Try experimenting with the curved side of the
deflector facing out or in, and by varying the distance
from the light source.
3
2

3
Attaching the Diusers
The inner and outer diusers add two levels of diusion that soften and spread the
light for an even and flattering eect. The diusers can be used with or without
the deflector plate.
1. Attach the inner diuser by attaching the diuser's touch-connect strips to
the touch connect tabs inside the BoomBox.
2. Attach the outer diuser by pressing the touch-
connect strips against the inner rim of the
BoomBox.
2
Removing the BoomBox
To remove the BoomBox from a Bowens mount:
1. Press the light fixture’s Bowens release.
2.
Turn the BoomBox counterclockwise and remove
it from the light.
3. If necessary, remove the diuser, deflector, and
extension. Then close the BoomBox by carefully
pulling on the center ring.
3
2
Tuotetiedot
Merkki: | Angler |
Kategoria: | Ei luokiteltu |
Malli: | BB-RE-2436-V2 |
Tarvitsetko apua?
Jos tarvitset apua merkille Angler BB-RE-2436-V2 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Angler Käyttöohjeet
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
11 Joulukuuta 2024
11 Joulukuuta 2024
11 Joulukuuta 2024
11 Joulukuuta 2024
11 Joulukuuta 2024
11 Joulukuuta 2024
11 Joulukuuta 2024
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu Betty Bossi
- Ei luokiteltu Cranborne Audio
- Ei luokiteltu Entes
- Ei luokiteltu Trezor
- Ei luokiteltu Vaddio
- Ei luokiteltu Digital Forecast
- Ei luokiteltu Manfrotto
- Ei luokiteltu Lenoxx
- Ei luokiteltu Beltronics
- Ei luokiteltu DCS
- Ei luokiteltu Konig & Meyer
- Ei luokiteltu OM SYSTEM
- Ei luokiteltu SPL
- Ei luokiteltu Dremel
- Ei luokiteltu Cleanmaxx
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025