Analog Way RK-350 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Analog Way RK-350 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 35 henkilölle ja sai 4.8 tähden keskimäärin 18 käyttäjältä

Sivu 1/4
RK-350 - Ref. RK-350
QUICK START GUIDE
Thank you for choosing Analog Way and the RK-350. By following these simple steps, you should be able
to setup and use your powerful remote Control Keypad within minutes. Discover the extensive RK-350
capabilies and intuive interface while conguring your rst show, and unleash your creavity for a new
experience in show and event management by Analog Way.
1 x RK-350 (RK-350)
1 x Power supply cord
1 x Carrying case
1 x Quick Start guide*
* The Quick Start guide is also available on www.analogway.com
WHATS IN THE BOX
RK-350 SETTINGS
The RK-350 automacally detects the right versions of
the product to control. Connect the DB9 cable supplied
or an Ethernet crossover cable using the same protocol
as the connected unit.
To control the following Seamless Switchers:
Control Mode
Seamless
Mixer
Seamless
Matrix
Quadravision
EKS550
x x x
QMX150
x
SMX250
x
QVU150
x
PLS350
x x
SPX450
x x
Navigaon Menu:
To access the menu, press the RK-350 EXIT/MENU buon
in the control secon. To highlight items in the menu which
will appear on the VFD screen, turn the scroll knob leor
right to the desired menu item. When you have reached
the desired menu item, press the ENTER buon in the
control secon to access that menu funcon.
Pressing the ENTER buon when a selecon has been made
sets the value to that selecon in the RK-350 memory.
When all sengs have been made, press the EXIT/MENU
buon to exit sub-menus and return to the main menu.
IMPORTANT: simply selecng a menu item will not set
it to that value. Be sure to press the ENTER buon when
parametering the menu items.
Once you have connected your to your switcher, RK-350
congure the connecon sengs on both devices.
For a serial connecon, select RS232 from the RS232/LAN
menu on both devices. (In menu)CONTROL
For a LAN connecon, select LAN from the RS232/LAN menu
on both devices (In CONTROL menu), and congure each
device with a unique IP in the LAN setup > RK-350 address
menu. The default IP on the is . RK-350 192.168.2.141
Next, enter the IP of the device you wish to control in the
Lan Setup > Device address menu.
Once your sengs are correct, the RK-350 will begin
to synchronize with the device, and you will be ready to
begin. (Wait a minute).
Buon color usage:
Solid red:
#1 = Source is on the Program output
#2 = Freeze enable
#3 = Stand-by buon
#4 = Mute enable
Solid green:
Solid orange:
Blinking red:
Blinking green:
#1 = Source is on Preview
#2 = Funcon available for modicaon
Unlocked sources / Shied keys
Layer/source selected or is currently acve
on the Program output
Layer/source selected or is not currently
acve on the Program output
Go on our website to register your product(s)
and be noed about new rmware versions:
hp://bit.ly/AW-Register

Tuotetiedot

Merkki: Analog Way
Kategoria: Ei luokiteltu
Malli: RK-350

Tarvitsetko apua?

Jos tarvitset apua merkille Analog Way RK-350 esitä kysymys alla ja muut käyttäjät vastaavat sinulle