AMX HPX-N102-USB-PC Käyttöohje
AMX
USB-keskitin
HPX-N102-USB-PC
Lue alta 📖 käyttöohje suomeksi merkille AMX HPX-N102-USB-PC (2 sivua) kategoriassa USB-keskitin. Tämä opas oli hyödyllinen 34 henkilölle ja sai 4.1 tähden keskimäärin 17.5 käyttäjältä
Sivu 1/2
QUICK START GUIDE
HPX-N102-USB-PC HydraPort Dual Charging USB Module
Overview
The HPX-N102-USB-PC Dual Charging USB Module (FG553-13) can be used in
conjunction with HydraPort HPX-600/900/1200/1600 and HydraPort Touch (7”/10”)
Connection Ports.
This module provides two user-accessible USB Power connections on the face of the
module, providing 2.1A USB power connections from the user's equipment to a remote
power supply (FIG. 1):
The HPX-N102-USB-PC receives it’s power from the (included) PSU2.1 USB Power
Supply (FG423-25). The PSU2.1 features two powered USB ports that provide up to
2.1A max per port (4.2A total across both ports):
Product Specifications
Installation
The following instructions describe installing the HPX-N102-USB-PC into HydraPort
HPX-600/900/1200/1600 and HydraPort Touch (7”/10”) Connection Ports.
For instructions on installing modules into the HPX-1600 Retractable Connection Port
(US and International versions), refer to the HPX-1600 Installation Manual - available to
view or download from www.amx.com.
Caution: Only use a manual screwdriver for the mounting instructions in this document.
Over-tightening the screws can hinder performance or damage the product.
1. Existing HydraPort Installations
For new HydraPort installations, skip to Step 2.
For existing HydraPort installations, the HydraPort Base Assembly must be un-mounted
from the surface before the HPX-N102-USB-PC module can be installed:
1. Cut/remove any cable ties that would restrict the removal of the HydraPort Base
Assembly.
2. Loosen the four mounting screws (located inside and at each end of the
HydraPort base assembly), in order to rotate the retaining tabs from under the
mounting surface.
Note that when the cover of the HydraPort base is open, only two of these screws
are visible. To access the other two mounting screws, tip the cover over to the
opposite open position (see FIG. 3).
3. Once the retaining tabs have been rotated out from under the mounting surface,
the HydraPort assembly can be lifted away from the mounting surface.
FIG. 4 provides a cutaway view of the End Cap, showing the retaining tabs in both
the loose position and the tightened (secure) position:
FIG. 1
HPX-N102-USB-PC DUAL USB POWER MODULE
FIG. 2 PSU2.1 - 2-PORT USB POWER SUPPLY
HPX-N102-USB-PC MODULE - SPECIF ICATIONS
Dimensions
(HWD):
Module: 0.98” x 2.05” x .276” (25 mm x 66 mm x 7 mm)
Note that “Depth” (D) represents the depth of the module faceplate
relative to the front of the connection ports.
Weight: .35 lbs (0.16 Kg)
USB Ports: (2) Type A USB Ports
USB Cables: (2) USB cables 6‘ (1.83 m) - connect the module to the USB Ports on
the PSU2.1 USB Power Supply
Enclosure: Matt black finished face plate (Polycarbonate plastic).
Compatibility: • HPX-600: 6 Module Connection Port - (FG560-01-SL/BL)
• HPX-900: 9 Module Connection Port - (FG560-02-SL/BL)
• HPX-1200: 12 Module Connection Port - (FG560-03-SL/BL)
• HPX-1600: 16 Module Retractable Connection Port
- (US - FG550-01-SL/BL, International - FG550-SL/BL)
• HPX-MSP-7: 8 Module HydraPort Touch Connection Port
- (BL - FG571-07)
- (SL - FG571-08)
• HPX-MSP-10: 10 Module HydraPort Touch Connection Port
- (SL - FG571-09)
- (BL - FG571-10)
Accessories: • PSU2.1 USB Power Supply (FG423-25) (included)
PSU2.1 USB POWER SUPPLY - SPECIF ICATIONS
Dimensions (HWD): 1.26” x 2.17” x 3.15” (3.2 cm x 5.5 cm x 8 cm)
Weight: .25 lbs (93.3 g)
2 USB Ports/LEDs: • 2 Charging Ports provide 2.1A USB charging (max per port)
• 4.2A total is provided across both ports.
• Blue LEDs on each USB port light to indicate that power is available.
Cable length =
6 feet (1.83 m)
USB Port
Power Status LED
(lights to indicate power)
Power Status LED
(lights to indicate power)
USB Port
PSU2.1 USB POWER SUPPLY - SPECIFICATIONS (CONT.)
Included
Accessories:
4 Power Plug Adapters:
• NEMA 1-15 (for North America)
• BS 1363 (for UK and Ireland)
• CEE 7/16 Europlug (for most European countries)
• AS/NZS 3112 (for Australia and New Zealand)
FIG. 3 HYDRAPORT BASE ASSEMBLY (SHOWN MOUNTED) - MOUNTING SCREWS LOCATIONS
FIG. 4 HYDRAPORT BASE ASSEMBLY (SHOWN MOUNTED) - MOUNTING SCREWS LOCATIONS
Tuotetiedot
| Merkki: | AMX |
| Kategoria: | USB-keskitin |
| Malli: | HPX-N102-USB-PC |
Tarvitsetko apua?
Jos tarvitset apua merkille AMX HPX-N102-USB-PC esitä kysymys alla ja muut käyttäjät vastaavat sinulle
USB-keskitin AMX Käyttöohjeet
31 Joulukuuta 2025
31 Joulukuuta 2025
USB-keskitin Käyttöohjeet
- USB-keskitin Primewire
- USB-keskitin Digitus
- USB-keskitin Tripp Lite
- USB-keskitin Trendnet
- USB-keskitin Sitecom
- USB-keskitin Rocstor
- USB-keskitin IOPLEE
- USB-keskitin TP Link
- USB-keskitin Cudy
- USB-keskitin Smart-AVI
- USB-keskitin Vorago
- USB-keskitin Speed-Link
- USB-keskitin Gembird
- USB-keskitin Icy Box
- USB-keskitin NGS
Viimeisimmät USB-keskitin Käyttöohjeet
20 Helmikuuta 2025
20 Helmikuuta 2025
12 Helmikuuta 2025
11 Helmikuuta 2025
11 Helmikuuta 2025
11 Helmikuuta 2025
11 Helmikuuta 2025
11 Helmikuuta 2025
11 Helmikuuta 2025
11 Helmikuuta 2025