Amana AMV6507RGS Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Amana AMV6507RGS (12 sivua) kategoriassa Magnetron. Tämä opas oli hyödyllinen 16 henkilölle ja sai 4.9 tähden keskimäärin 8.5 käyttäjältä
Sivu 1/12
MICROWAVE HOOD COMBINATION
INSTALLATION INSTRUCTIONS
This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation
Requirements” section for further notes.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration
in these installation instructions.
MICROWAVE HOOD COMBINATION SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
MICROWAVE HOOD COMBINATION SAFETY ............................ 1
INSTALLATION REQUIREMENTS .................................................2
Tools and Parts .............................................................................2
Remove Cardboard Template ......................................................2
Location Requirements ................................................................2
Product Dimensions .....................................................................3
Electrical Requirements ...............................................................3
INSTALLATION INSTRUCTIONS ...................................................4
Remove Mounting Plate ............................................................... 4
Rotate Blower Motor ....................................................................4
Locate Wall Stud(s) ......................................................................6
Mark Rear Wall .............................................................................7
Drill Holes in Rear Wall .................................................................7
Attach Mounting Plate to Wall .....................................................8
Prepare Upper Cabinet ................................................................8
Install Damper Assembly .............................................................9
Install the Microwave Oven ..........................................................9
Complete Installation .................................................................10
VENTING DESIGN SPECIFICATIONS ......................................... 11
ASSISTANCE ................................................................................12
Replacement Parts .....................................................................12
Accessories ................................................................................12
Table of Contents
W11084412A
2
INSTALLATION REQUIREMENTS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
■ Measuring tape
■ Pencil
■ Masking tape or
thumbtacks
■ Scissors
■ No. 2 Phillips screwdriver
■ No. 3 Phillips screwdriver
for Z\v - 20 x 3" (7.62 cm)
bolts
■ Drill
■ C\zn" (5 mm), C\," (10 mm),
B\," (16 mm) drill bits
■ C\v" (19 mm) hole saw
■ Diagonal wire cutting pliers
■ Stud finder
■ M\zn" (11.11 mm) socket
wrench (or box wrench) for
Z\v" x 2" (6.35 mm x
5.08 cm) lag screws
■ 1½" (3.8 cm) diam. hole
drill bit for wood or metal
cabinet
■ Keyhole saw
■ Caulking gun and
weatherproof caulking
compound
■ Duct tape
Parts Supplied
For information on reordering, see the “Replacement Parts”
section.
NOTE: The hardware items listed here are for wood studs.
For other types of wall structures, be sure to use appropriate
fasteners.
A
B
C
D E F
G
H
A. C\zn
-24 x 3" (7.62 cm) round-head
bolts (2)
B. Z\v-20 x 3" (7.62 cm) flat-head
bolts (2)
C. Washers (2)
D. C\zn" (5 mm) toggle nuts (2)
E. Z\v" x 2" (6.35 mm x 5.08 cm)
lag screws (2)
F. Sheet metal screws (2)
G. Power supply cord bushing (1)
H. Damper assembly (for wall or
roof venting)
Not Shown:
■ Upper cabinet template
■ Mounting plate (attached to
back of microwave oven)
■ Cardboard template (part of
packaging)
■ Aluminum grease filters
■ Charcoal filters (Depending
on model, charcoal filters may
not be included. See User
Instructions.)
NOTE: Depending on model, aluminum grease filter and charcoal
filter may be combined.
Materials Needed
■ Standard fittings for wall or roof venting. See the “Venting
Design Specifications” section.
Remove Cardboard Template
The cardboard piece from the top of the microwave oven
packaging is perforated. The piece inside the perforation
is for use as a rear wall template.
1. Cut along the perforation to separate the template from the
rest of the cardboard packaging.
2. Set the cardboard template to the side and refer to it during
the “Mark Rear Wall” part of installation.
Location Requirements
Check the opening where the microwave oven will be installed.
The location must provide:
■ Minimum installation dimensions. See the “Installation
Dimensions” illustration.
■ Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud and
minimum C\," (10 mm) thickness drywall or plaster/lath within
cabinet opening.
■ Support for weight of 150 lbs (68 kg) which includes
microwave oven and items placed inside the microwave
oven and upper cabinet.
■ Grounded electrical outlet inside upper cabinet. See the
“Electrical Requirements” section.
NOTES:
■ If installing the microwave oven near a left sidewall, make
sure there is at least 6" (15.2 cm) of clearance between the
wall and the microwave oven so that the door can open fully.
■ Some cabinet and building materials are not designed to
withstand the heat produced by the microwave oven for
cooking. Check with your builder or cabinet supplier to make
sure that the materials used will not discolor, delaminate, or
sustain other damages.
Special Requirements
For Wall Venting Installation Only:
■ Cutout must be free of any obstructions so that the vent fits
properly and the damper blade opens freely and fully.
For Roof Venting Installation Only:
■ If you are using a rectangular-to-round transition piece,
the 3" (7.6 cm) clearance needs to exist above the microwave
oven so that the damper blade can open freely and fully.
See “Rectangular to Round Transition” illustration in the
“Venting Design Specifications” section.
3
Installation Dimensions
NOTE: The grounded 3 prong outlet must be inside the upper
cabinet. See the “Electrical Requirements” section.
12" (30.5 cm) min.
14" (35.6 cm) max.
30"
(76.2 cm)
min.
A B
upper cabinet and
side cabinet depth
30"
(76.2 cm)
typical*
66" (167.6 cm) min.
A. 2" x 4" (5.08 x 10.16) wall stud
B. Grounded 3 prong outlet
*30” (76.2 cm) is typical for 66” (167.6 cm) installation height.
Exact dimensions may vary depending on type of range/
cooktop below.
Product Dimensions
29
⁷⁄₈
" (76.0 cm)
17
¹⁄₈
"
(43.5 cm)
+/-
³⁄₁₆
"
(0.5 cm)
16
¹⁄₄
"
(41.3 cm)
Up to
16
³⁄₄
"
(42.5 cm)*
*Overall depth of product will vary slightly depending on
door design.
Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Observe all governing codes and ordinances.
Required:
■ A 120-volt, 60 Hz, AC-only, 15- or 20-amp electrical supply
with a fuse or circuit breaker
Recommended:
■ A time-delay fuse or time-delay circuit breaker
■ A separate circuit serving only this microwave oven
GROUNDING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING: Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
Tuotetiedot
| Merkki: | Amana |
| Kategoria: | Magnetron |
| Malli: | AMV6507RGS |
Tarvitsetko apua?
Jos tarvitset apua merkille Amana AMV6507RGS esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Magnetron Amana Käyttöohjeet
21 Helmikuuta 2025
22 Tammikuuta 2025
22 Tammikuuta 2025
22 Tammikuuta 2025
22 Tammikuuta 2025
Magnetron Käyttöohjeet
- Magnetron Hoover
- Magnetron Elba
- Magnetron IKEA
- Magnetron Hanseatic
- Magnetron Milectric
- Magnetron Whirlpool
- Magnetron Cecotec
- Magnetron Sheffield
- Magnetron Hotpoint
- Magnetron Adler
- Magnetron Igenix
- Magnetron Privileg
- Magnetron Exquisit
- Magnetron Svan
- Magnetron Silvercrest
Viimeisimmät Magnetron Käyttöohjeet
8 Huhtikuuta 2025
4 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
31 Maaliskuuta 2025
30 Maaliskuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025