Altair Groda 52863-BAT-WH-FB Käyttöohje

Altair kylpyamme Groda 52863-BAT-WH-FB

Lue alta 📖 käyttöohje suomeksi merkille Altair Groda 52863-BAT-WH-FB (4 sivua) kategoriassa kylpyamme. Tämä opas oli hyödyllinen 39 henkilölle ja sai 4.9 tähden keskimäärin 20 käyttäjältä

Sivu 1/4
B) Protect your Tub.
Before commencing and installation, ensure the Tub is completely protected, leave covering
in place until the bathroom is complete. Scratches and damage incurred during installation
are not covered by the warranty.
TOOLS REQUIRED FOR INSTALLATION
51167-BAT-WH-FB
Spirit Level Wrench Tape Marking Pencil Silicone Gun
Step 1
This can be done by turning the feet bars accordingly;
Then use wrench to tighten the nuts on the bars.
See figure 1
IMPORTANT:
* Two people are required for installation.
* Freestanding tub is not designed to take weight on the rim.
Do not sit or stand on the tub rim.
Figure 1
Receive Your Tub
Feet set at 3mm above the floor
A) Unpack and check for damage.
After receiving your tub, please unpack and remove all covering, checking whether there is
any damage. Repack the tub if it is not being immediately installed. It will be rejected any
claim for damage if not notified in a timely manner.
Step 2
Mark the floor with the outline of the tub, at the final installation position with the marking
pencil.
Please retain this manual after installation for future reference and
maintenance
Product must be installed in compliance with relevant Water Bylaws
52863-BAT-WH-FB
Altair Inc.

Tuotetiedot

Merkki: Altair
Kategoria: kylpyamme
Malli: Groda 52863-BAT-WH-FB

Tarvitsetko apua?

Jos tarvitset apua merkille Altair Groda 52863-BAT-WH-FB esitä kysymys alla ja muut käyttäjät vastaavat sinulle