Alpine KIT-8A3 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Alpine KIT-8A3 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 26 henkilölle ja sai 4.9 tähden keskimäärin 13.5 käyttäjältä

Sivu 1/4
7. Place facia plate to nish
installation
Double DIN Kit contents
(1) Facia Plate
(2) Mounting Bracket Right
(3) Mounting Bracket Left
(4) Magnet
(5) Flat Headed Screw
Installation Manual
INE-W928R Kit
Compatible with these Alpine navigation devices
INE-W928R
colour / part-no.:
black: KIT-8A3 /KIT-8A3D
1
3
5
2
5
4
This kit can be used for cars which were equipped
with the following factory radios:
• Chorus Gen.II+
• Concert Gen.II+
• Symphony II
• Symphony II+
• RNS-E
• RNS-low (BNS 5.0)
If the car was equipped with a 1 DIN radio like Radio Chorus II, Concert II or
Symphony II, you need to change the center console to 2 DIN.
Your Audi partner can support you.
6. Connect all required circuit points
Place Alpine INE-W928R on dash
board and x it with 2 OEM
Torx screws

Tuotetiedot

Merkki: Alpine
Kategoria: Ei luokiteltu
Malli: KIT-8A3

Tarvitsetko apua?

Jos tarvitset apua merkille Alpine KIT-8A3 esitä kysymys alla ja muut käyttäjät vastaavat sinulle