Adam Hall PRO PORT 2TT Käyttöohje
Adam Hall
Sähköpistoke
PRO PORT 2TT
Lue alta 📖 käyttöohje suomeksi merkille Adam Hall PRO PORT 2TT (2 sivua) kategoriassa Sähköpistoke. Tämä opas oli hyödyllinen 26 henkilölle ja sai 4.6 tähden keskimäärin 13.5 käyttäjältä
Sivu 1/2
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | .com adamhall
PRO PORT 2TT
POWER DISTRIBUTION STRIP
WITH 1X POWER TWIST TR1 IN + 3 X POWER TWIST TR1 OUT
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the
equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations).
Make certain that wall mounts are properly installed and secured. Make certain that the
equipment is installed securely and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sourc-
es of heat. Make certain that the equipment is always installed so that is cooled sufficiently
and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. -Do not use this equipment in the immediate vicinity of water (does not apply to special out
door equipment - in this case, observe the special instructions noted below. Do not expose
this equipment to flammable materials, fluids or gases.
12. -Make certain that dripping or splashed water cannot enter the equipment. Do not place con
tainers filled with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufac-
turer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g.,
due to tripping hazards.
17. -During transport, make certain that the equipment cannot fall down and possibly cause prop
erty damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the
equipment or if it has been damaged in another way, switch it off immediately and unplug
it from the mains outlet (if it is a powered device). This equipment may only be repaired by
authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please
separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. If the equipment has been exposed to strong fluctuations in temperature (for example, after
transport), do not switch it on immediately. Moisture and condensation could damage the
equipment. Do not switch on the equipment until it has reached room temperature.
23. Before connecting the equipment to the power outlet, first verify that the mains voltage and
frequency match the values specified on the equipment. If the equipment has a voltage selec-
tion switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your
wall outlet, contact your electrician.
24. Do not step on the power cord. Make certain that the power cable does not become kinked,
especially at the mains outlet and/or power adapter and the equipment connector.
25. When connecting the equipment, make certain that the power cord or power adapter is al-
ways freely accessible. Always disconnect the equipment from the power supply if the equip-
ment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord.
Never touch the power cord and power adapter with wet hands.
26. Whenever possible, avoid switching the equipment on and off in quick succession because
otherwise this can shorten the useful life of the equipment.
27. To disconnect the equipment from the power mains completely, unplug the power cord or
power adapter from the power outlet.
28. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning
strike or before extended periods of disuse.
CAUTION:
CA UT ION
RI SK OF SELE CTRI C HO CK
DO N O NOT PE
Never remove the cover, because otherwise there may be a risk of electric shock. There are no
user serviceable parts inside. Have repairs carried out only by qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electrical shock.
The exclamation mark within an equilateral triangle is intended to alert the user to the pres-
ence of
important operating and maintenance instructions.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adam-
hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this ap-
pliance may not be treated as household waste. This is to avoid environmental damage or person-
al injury due to uncontrolled waste disposal. Please dispose of this product separately from other
waste and have it recycled to promote sustainable economic activity.
Product number AHPROPORT2TT
Product type Power strips
Type Not 19 inch
Number of outlets 1 x black & yellow power in
+ 3 x black & yellow power out
Power input Black and yellow power I / O
Operating voltage 230 V
Max. current 16 A
Cabinet material Metal
Color Black
Protection class IP20
Width 208 mm
Height 60 mm
Depth 78 mm
Weight 0.8 kg
FEATURES
• Rated @ 230 V, 16 A
• 3 Power Twist TR1 output connectors
• All connectors feature flip lids
• Metal housing
• 2 x M10 inserts
• IP rating 20
INTRODUCTION
Designed for easy power distribution on stages, trusses and in gear rigs, the PROPORT
2TT features a Power Twist TR1 input connector and 3 Power Twist TR1 output
connectors. Two of those are located on top of the rugged metal enclosure which also
provides two female thread M10 suspension points.
SPECIFICATIONS
Tuotetiedot
| Merkki: | Adam Hall |
| Kategoria: | Sähköpistoke |
| Malli: | PRO PORT 2TT |
Tarvitsetko apua?
Jos tarvitset apua merkille Adam Hall PRO PORT 2TT esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Sähköpistoke Adam Hall Käyttöohjeet
16 Lokakuuta 2024
Sähköpistoke Käyttöohjeet
- Sähköpistoke EMOS
- Sähköpistoke V-Tac
- Sähköpistoke EQ-3
- Sähköpistoke Kopp
- Sähköpistoke Hama
- Sähköpistoke PureLink
- Sähköpistoke Savio
- Sähköpistoke InterBar
- Sähköpistoke Brennenstuhl
- Sähköpistoke Elektrobock
- Sähköpistoke Niceboy
- Sähköpistoke Perel
- Sähköpistoke Schwaiger
- Sähköpistoke Extron
- Sähköpistoke Lanberg
Viimeisimmät Sähköpistoke Käyttöohjeet
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
28 Tammikuuta 2025
25 Tammikuuta 2025
24 Tammikuuta 2025