4ms Row Power 35 Käyttöohje
Sivut 1 Engels Näppäimistö
Lue käyttöohje merkille 4ms Row Power 35 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 34 henkilölle. Kysyttävää mallista? Esitä kysymys
Row Power 25
4ms Company
Eurorack Power Module
User Manual 1.0 – Sept. 24, 2019
!
The Row Power 25 is a power supply module for the Eurorack modular system. It
requires a barrel-style power brick (15V – 20V DC) and supplies power to modules
via flying bus cables, direction connection, and/or bus boards using the single
standard 16-pin Eurorack header on the back. For custom power systems, the
Row Power 25 has a set of easily soldered holes for using large gauge wire or
MTA156 connectors to connect to distribution bus boards.!
Multiple Row Power modules can be powered from a single power brick by
daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be
daisy-chained to 4ms Company’s Pod enclosures.!
Maximum and recommended power output:
•+12V: 1.4A maximum, 1.0A recommended!
•-12V: 0.8A maximum, 0.5A recommended!
•+5V: 1.0A maximum, 0.8A recommended!
Maximum power output can be expected under normal operating conditions.
Recommended power output is guaranteed under extreme temperature and limited airflow
conditions.
Power Brick:
•
Available wherever Row Power modules are sold.!
•You may use your own power brick if it meets the following:!
•
15VDC to 20VDC!
•
Minimum 30W output power!
•
Positive center 2.1mm barrel plug!
•
Low-noise output!
Features:
•Two identical barrel power jacks at top and bottom for daisy-chaining (either
jack can be used for power input or chaining)!
•!On/off switch
•!LED indicates +/-12V rails are functioning
•!25.6mm (1.01”) deep with power cable attached
•!22.0mm (0.87”) with no power cable (when using solder points)
•#4HP
Page of 14
Tuotetiedot
| Merkki: | 4ms |
| Kategoria: | Näppäimistö |
| Malli: | Row Power 35 |
Tarvitsetko apua?
Jos tarvitset apua merkille 4ms Row Power 35 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Näppäimistö 4ms Käyttöohjeet
Kaikki 4ms Näppäimistö käyttöohjeet