Advantech WISE-2410X-A02NA Käyttöohje
Advantech
Ei luokiteltu
WISE-2410X-A02NA
Lue alta 📖 käyttöohje suomeksi merkille Advantech WISE-2410X-A02NA (50 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 12 henkilölle ja sai 4.5 tähden keskimäärin 6.5 käyttäjältä
Sivu 1/50
User Manual
WISE-2410
LoRaWAN Smart Condition
Monitoring Sensor
WISE-2410 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2020
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the
right to improve the products described in this manual at any time without notice. No
part of this manual may be reproduced, copied, translated, or transmitted in any form
or by any means without the prior written permission of Advantech Co., Ltd. The
information provided in this manual is intended to be accurate and reliable. However,
Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements
of the rights of third parties that may result from its use.
Acknowledgments
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers are billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more details.
If you believe your product is defective, follow the steps outlined below:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandize authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and proof of the purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Part No. 2003240000 Edition 1
Printed in Taiwan October 2020
iii WISE-2410 User Manual
Declaration of Conformity
Notice to OEM integrator
1. In the users manual of the end of product, the end user has to be informed to keep
at least 20cm separation with the antenna while this end product is installed and
operated.
2. The antenna(s) used for this transmitter must not be collocated or operating in con-
junction with any other antenna or transmitter within a host device, except in accor-
dance with FCC multi-transmitter product procedures.
3. Only those antennas with same type and lesser gain filed under this FCC ID num-
ber can be used with this device.
4. The regulatory label on the final system must include the statement: “Contains
FCC ID: M82-WISE2410” or using electronic labeling method as documented in KDB
784748.
5. The final system integrator must ensure there is no instruction provided in the user
manual or customer documentation indicating how to install or remove the transmitter
module except such device has implemented two-ways authentication between mod-
ule and the host system.
6. The final host manual shall include the following regulatory statement: This equip-
ment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and on,
the user is encouraged to try and correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncon-
trolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
WISE-2410 User Manual iv
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions, and Notes
Document Feedback
To assist us with improving this manual, we welcome all comments and constructive
criticism. Please send all feedback in writing to support@advantech.com.
Warning! Warnings indicate conditions that if not observed may cause personal
injury!
Caution! Cautions are included to help prevent hardware damage or data losses.
For example, “Batteries are at risk of exploding if incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type as recommended by the
manufacturer. Discard used batteries according to the manufacturer's
instructions.” or "To prevent damages on the sensor, tensile stresses
must be avoided under all driving conditions.
Note! Notes provide additional optional information.
v WISE-2410 User Manual
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
WISE-2410
1 x WISE-2410 module
1 x Mounting stud (1/4-28 UNF x 9.4Lmm)
1 x Quick start manual
* 2 pcs AA 3.6VDC batteries should be ordered respectively
* Built-in Antenna
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
4. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
5. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
8. Never pour liquid into an opening. This may cause fire or electrical shock.
9. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
10. If one of the following occurs, have the equipment checked by qualified service
personnel:
The USB port is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
11. Do not leave the equipment in an environment with a storage temperature of
below -20 °C (-4 °F) or above 85 °C (185 °F) USB powered/50 °C (122 °F).
12. Battery powered as this may cause damage. The equipment should be kept in a
controlled environment.
13. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type as recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
14. According to IEC 704-1:1982 standards, the sound pressure level at the opera-
tor's position does not exceed 70 dB (A).
DISCLAIMER: These instructions are provided in accordance with IEC 704-1. Advan-
tech disclaims all responsibility for the accuracy of any statements contained herein.
WISE-2410 User Manual vi
Safety Precautions - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage:
Disconnect the power supply before making any configuration changes. The
sudden rush of power after connecting a jumper or installing a card may dam-
age sensitive electronic components.
NCC 警语
警语
警语
警语警语
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得
擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法
規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波
輻射性電機設備之干擾。
VCCI
この装置は、クラス B 機器です。この装置は、住宅環境で使用することを目的とし
ていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受
信障害を引き起こすことがあります。
使用説明書に従って正しい取り扱いをして下さい。 VCCI-B
vii WISE-2410 User Manual
Contents
Chapter 1 Product Overview ................................1
1.1 Series Family and Specifications .............................................................. 2
1.2 Features .................................................................................................... 2
1.3 System Architecture .................................................................................. 2
Figure 1.1 System Architecture ................................................... 2
1.4 Mechanical Design and Dimensions ......................................................... 3
Figure 1.2 WISE-2410 Dimension ............................................... 3
1.5 LED ........................................................................................................... 3
Figure 1.3 LED............................................................................. 3
Chapter 2 Product Specification..........................5
2.1 Wireless Interface ..................................................................................... 6
2.2 General ..................................................................................................... 6
2.3 Power ........................................................................................................ 6
2.4 Software .................................................................................................... 7
2.5 Configuration Interface.............................................................................. 7
2.6 Sensor Specifications................................................................................ 7
Chapter 3 Mechanical and Hardware Installation
9
3.1 Interface Introduction .............................................................................. 10
Figure 3.1 WISE-2410 Interface Introduction ............................ 10
3.2 Tighten two chassis................................................................................. 10
Figure 3.2 Tighten two chassis .................................................. 10
3.3 Mounting ................................................................................................. 11
3.3.1 Installation Direction.................................................................... 11
Figure 3.3 WISE-2410 Installation Direction on motor............... 11
Figure 3.4 WISE-2410 Detail Installation Direction on motor .... 11
3.3.2 Stud mount.................................................................................. 12
Figure 3.5 Stud mount ............................................................... 12
Figure 3.6 Stud mount ............................................................... 12
3.3.3 Magnetic bases........................................................................... 12
Figure 3.7 Magnetic bases ........................................................ 12
3.3.4 Adhesive Mounting Pad .............................................................. 13
Figure 3.8 Adhesive Mounting Pad............................................ 13
3.4 Battery Replacement............................................................................... 14
Figure 3.9 Battery Replacement Step 1..................................... 14
Figure 3.10Battery Replacement Step 2..................................... 14
Figure 3.11Battery Replacement Step 3..................................... 15
Figure 3.12Battery Replacement Step 4..................................... 15
Figure 3.13Battery Replacement Step 5..................................... 16
Figure 3.14Battery Replacement Step 6..................................... 16
Chapter 4 System Configuration .......................17
4.1 Sensor and Gateway Connections.......................................................... 18
4.1.1 Sensor (WISE-2410) configuration ............................................. 18
4.1.2 LoRaWAN gateway (WISE-6610) configuration ......................... 20
4.1.3 Binding Process Between WISE-2410 and WISE-6610 ............. 23
WISE-2410 User Manual viii
4.2 WISE-2410 Configuration ....................................................................... 28
4.2.1 Information Page ........................................................................ 28
4.2.2 Configuration .............................................................................. 29
4.2.3 IO Status..................................................................................... 31
4.2.4 Data Logger................................................................................ 33
4.2.5 Diagnostician .............................................................................. 35
4.2.6 Downlink Command.................................................................... 35
4.3 Get Raw Data from WISE-2410.............................................................. 36
4.3.1 Standard operation mode ........................................................... 36
4.3.2 Real-Time operation mode ......................................................... 38
Appendix A Modbus Address............................... 39
Chapter 1
1Product Overview
3 WISE-2410 User Manual
Chapter 1 Product Overview
1.4 Mechanical Design and Dimensions
Figure 1.2 WISE-2410 Dimension
1.5 LED
Figure 1.3 LED
LED Color Indication Behavior
Status Green ON Turn on 2 sec when power on
Turn on 1 ms when RF transmission
OFF Idle
WISE-2410 User Manual 4
Chapter 2
2Product Specification
WISE-2410 User Manual 6
2.1 Wireless Interface
1. Operating Frequency:
US 902-928 (MHz)
EU 863-870 (MHz)
JP 920-928 (MHz)
TW 920-925 (MHz) (AS923)
2. Data Rate:
50 kbps at FSK mode EU
21.9 kbps at SF7 mode US
5.47 kbps at SF7 mode JP
5.47 kbps at CCS mode TW
3. Antenna Gain:
902~928 MHz: 1 dBi
863~870 MHz: 1 dBi
4. Transmit Power: Up to +20 dBm
5. Receiver Sensitivity: -136 dBm at 125 kHz bandwidth
6. Topology: Star
2.2 General
Enclosure: PC
Mounting: Stud mount, mounting pad and adhesives, magnetic base
Dimensions (Height x Diameter): 84.7 x 48.3 mm
Operation temperature:
–Powered by batteries: -20 ~ 50 °C
–Powered by Micro-B USB cable: -20 ~ 85 °C
Storage temperature: -30 ~ 85 °C (without battery)
Operating humidity: 10 ~ 95% RH (non-condensing)
Storage humidity: 5 ~ 95% RH (non-condensing)
2.3 Power
WISE-2410 is designed for two AA 3.6 VDC batteries as an power source. Press the
power switch on the top of chassis (see the Figure 1.3 led) and turn on WISE-2410.
Note! The transmitting distance is subject to the environment of application
site. Please perform site survey to determine the set up range of the
wireless network.
Note! Equipment will operate below 30% humidity. However, static electricity
problems occur much more frequently at lower humidity levels. Make
sure you take adequate precautions when you touch the equipment.
Consider using ground straps, anti-static floor coverings, etc. If you use
the equipment in low humidity environments.
Note! Battery needs to order separately
1760002647-01 3.6V/2500mAh AA Cylindrical Battery (nonrecharge-
able).
WISE-2410 User Manual 8
Chapter 3
3Mechanical and
Hardware Installation
WISE-2410 User Manual 10
3.1 Interface Introduction
Figure 3.1 WISE-2410 Interface Introduction
3.2 Tighten two chassis
Turn clockwise the top chassis to locking point to tighten bottom chassis.
Figure 3.2 Tighten two chassis
11 WISE-2410 User Manual
Chapter 3 Mechanical and Hardware Installation
3.3 Mounting
Applicable installation methods are briefly described in the following sections.
3.3.1 Installation Direction
WISE-2410 Builds-in 3-axis vibration sensor. Please follow the following installation
guide to make sure the eigenvalues from your device are correct.
Figure 3.3 WISE-2410 Installation Direction on motor
Figure 3.4 WISE-2410 Detail Installation Direction on motor
WISE-2410 User Manual 12
3.3.2 Stud mount
1. Dig a hole in motor surface (1/4-28).
2. Fasten WISE-2410 and stud (1/4-28 to 1/4-28).
Figure 3.5 Stud mount
3. Fasten WISE-2410 (with stud) and hold of motor surface.
Figure 3.6 Stud mount
3.3.3 Magnetic bases
To avoid the sudden impact damage WISE-2410, please follow the following steps.
1. First, fasten magnetic base on the motor.
2. Fasten WISE-2410 and magnetic base.
Figure 3.7 Magnetic bases
Note! Please Wrench need to hold base steel (not contact chassis) when you
use Wrench to fasten WISE-2410(with stud) to hold of motor.
13 WISE-2410 User Manual
Chapter 3 Mechanical and Hardware Installation
3.3.4 Adhesive Mounting Pad
Fasten WISE-2410 and stud, use adhesive epoxy glue(24hours) to stick on the motor
surface.
Figure 3.8 Adhesive Mounting Pad
WISE-2410 User Manual 14
3.4 Battery Replacement
1. Slowly remove top chassis.
Figure 3.9 Battery Replacement Step 1
2. Grab the Mylar and disconnect the connection between battery holder and
PCBA.
Figure 3.10 Battery Replacement Step 2
15 WISE-2410 User Manual
Chapter 3 Mechanical and Hardware Installation
3. Take out the battery holder and plug in new batteries. Please beard and make
sure the batteries are both in the right anode and cathode position.
Figure 3.11 Battery Replacement Step 3
4. Plug in the battery pack and make sure the cable is hidden between the PCBA
and the battery pack as follow.
Figure 3.12 Battery Replacement Step 4
WISE-2410 User Manual 16
5. Make the connection between battery holder and PCBA. Please make sure the
cable has cross by the dent which is on the right side PCBA.
Figure 3.13 Battery Replacement Step 5
Figure 3.14 Battery Replacement Step 6
Chapter 4
4System Configuration
19 WISE-2410 User Manual
Chapter 4 System Configuration
6. Use web configuration in WISE Utility or press Open In Browser to open the
web configuration in any browser (Google Chrome is recommended).
Note: Web in WISE Utility is using IE browser.
7. Click to check the basic information of the module.Information
8. Click to use Information, RF Module, Time&Date, Scheduling, Configuration
Control, Firmware settings.
PC Browser Chrome Firefox IE11 IE10
Configuration Y Y Y Y
File Upload Y Y Y N
Data Log Chart Y Y Y Y
Data Log Export Y Y N N
WISE-2410 User Manual 20
9. Click to check vibration and temperature data.IO Status
4.1.2 LoRaWAN gateway (WISE-6610) configuration
1. Default IP of WISE-6610 is 192.168.1.1.
2. Login-
Username: root
Password: root
You can see the main page of Router; you can change IP in if needed.LAN
21 WISE-2410 User Manual
Chapter 4 System Configuration
3. LoRaWAN setting.
Step1: Choose User Modules LoRaWAN Gateway and .
You can see WISE-6610N100-A (Support NA frequency band), make sure all of
these parameters are matching with the RF module setting on WISE-2410.
Tuotetiedot
| Merkki: | Advantech |
| Kategoria: | Ei luokiteltu |
| Malli: | WISE-2410X-A02NA |
Tarvitsetko apua?
Jos tarvitset apua merkille Advantech WISE-2410X-A02NA esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Advantech Käyttöohjeet
11 Helmikuuta 2025
11 Helmikuuta 2025
10 Helmikuuta 2025
8 Helmikuuta 2025
8 Helmikuuta 2025
8 Helmikuuta 2025
8 Helmikuuta 2025
8 Helmikuuta 2025
8 Tammikuuta 2025
1 Tammikuuta 2025
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu REMKO
- Ei luokiteltu Audibax
- Ei luokiteltu Escort
- Ei luokiteltu Roland
- Ei luokiteltu Lowel
- Ei luokiteltu Taylor
- Ei luokiteltu DPM
- Ei luokiteltu Kern
- Ei luokiteltu Apantac
- Ei luokiteltu PoLabs
- Ei luokiteltu H.Koenig
- Ei luokiteltu Tiny Love
- Ei luokiteltu Laica
- Ei luokiteltu Auna
- Ei luokiteltu Pyrex
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025